Journal

Rustic Plant Supports

04.19.2018

Rustic garden ornaments naturally complement any home garden, whether or not the home itself has a rustic style or setting.

(from carolyneroehm.com)

While anticipating gardening season several springs ago, we posted a Journal article titled Rustic Garden Structures that featured mostly sizable, intricate outdoor rustic structures manufactured by furniture companies such as Old Hickory and Lincraft from the early 1900’s through the 1940’s.

Although that article did describe a pair of large, never-used 1920’s Old Hickory obelisks that we once owned, wooden rustic garden structures typically do not survive long enough to convey into the antiques trade.

(from archive.wiltonbulletin.com)

So to add time-honored rustic designs to your garden, a good option is to make your own simple rustic garden structures using natural, sustainably-harvested twigs, trunks, and branches. It is best to choose rot-resistant varieties such as cedar and black locust so that your handiwork will last longer than one season in the outdoors.

(from hydraz.club)

The following do-it-yourself instructions and design inspirations gleaned from the web focus on three kinds of simple rustic plant supports:  trellises, tuteurs, and wattle surrounds. These types of structures have imbued gardens around the world with a traditional rustic aesthetic since at least medieval times, and perhaps as far back as when humans first began cultivating crops.

 

A Rustic Trellis

(from sunset.com)

Flat trellises can support climbing plants, or be used simply as ornamental backdrops for garden beds or to add architectural interest to the side wall of a house or garden shed.

 

How to Make a Simple Trellis from Prunings
(adapted from sunset.com/garden/backyard-projects/make-rustic-trellis)

Tools and Materials:

12 straight branches, limbs or canes, each approximately 1″ in diameter:
– Three pieces, each 3 feet long (A)
– One piece, 6 feet long (B)
– Two pieces, each 5 feet long (C)
– Two pieces, each 25 inches long (D)
– Two pieces, each 221/2 inches long (E)
– Two pieces, each 391/2 inches long (F)

One box of one-and-three-quarter inch nails

Hammer

Spool of floral wire

Directions:

The finished structure is 7′ 4.5″  tall x 3′ wide.

1. Trim any side branches from the prunings.
2. Lay the crosspieces (A) horizontally on a flat surface, with two of them 18 inches apart, and the third 16 inches above the center one.
3. Lay the centerpiece (B) vertically across the crosspieces. The bottom end of the centerpiece should overlap the lowest crosspiece by 4 1/2 inches. Nail centerpiece to crosspieces at center joints.
4. Lay side pieces (C) vertically over crosspieces as shown, setting them about 3 1/2 inches in from the ends of the crosspieces. Nail to crosspieces at the joints.
5. Place D and E pieces diagonally between crosspieces, slightly overlapping the horizontal crosspieces as shown. Nail them to the horizontals at the joints.
6. Place top pieces (F) so they cross behind the centerpiece (B) and on top of the side pieces (C).
For additional stability, turn structure over and nail joints from the back side, then wrap wire several times around the main intersections.

 

Here is some additional inspiration for designing your own rustic trellises:

Keep Reading